WD-12

WD-12

GENTAUR

+32 1658 9045

or

0032 (0)16 41 44 07

+32 1650 9045

info@gentaur.com

Av. de l' Armée 68

B-1040 Brussels

BELGIUM

France

tel 01 43 25 01 50

fax01 43 25 01 60

9, rue Lagrange

75005 Paris

Italia

tel 02 36 00 65 93

fax 02 36 00 65 94

20135 Milano

Deutschland

tel +32 1658 9045

fax +32 1650 9045

Polska

Tel 00 48 51 760 77 08

Fax 00 32 16 50 90 45

Ulica Ogarna 15/19 B m2

80-826 Gdansk

日本

tel +81 78 386 0860

fax +81 78 306 0296

Minaatojimaminami-manchi

Chuo-ku, Kobe

065-0047

Österreich
+43720880899

Canada Montreal
+15149077481

Česká republika Praha
+420246019719

Danmark
+4569918806

Finland Helsset
+358942419041

Ελλάς Αθήνα
+302111768494

Magyarország Budapest
+3619980547

Ireland Dublin
+35316526556

Luxembourg
+35220880274

Nederland
+31208080893

Norge Oslo
+4721031366

Polska Warszawa
+48223988221

Sverige Stockholm
+46852503438

Schweiz Züri
+41435006251

US New York
+17185132983

Other Countries
0032 (0)16 41 44 07

Sample concentrator - WD12

The instrument consists of a base and stand assembly, sample holder and gas distribution system. Test tubes are held in place by a spring-loaded sample holder and support tray. Each position is numbered. The gas passes through an adjustable flow meter to the distribution manifold. Flexible tubing leads to valve-tube assemblies at each position. Depending on the test-tube size and solvent volume they can be individually raised or lowered to the correct height. Needles blow gas onto the surface of the solution resulting in rapid evaporation of the solvent. All materials used are laboratory quality and can withstand contact with organic solvents.
The round, stainless steel water bath is thermostatically controlled and will accurately maintain water temperature from ambient temperature to 99℃.

Features
1. LED display, 12 positions
2. Copact size takes minimal hood space
3. Water bath provides gentl heat
4. Circular stand turns so each sample is accessible from the front
5. Accommodates samples in test tubes 10 to 29mm diameter, Volumes from 1 ml to 50 ml
5. A gas flow meter with valve, controls and indicates gas consumption
6. A needle valve adjusts gas flow at each position
7. Stainless steel 150mm- gauge needles standard
8. All metal parts are made of stainless steel, nickel chromed brass or anodized aluminum
9. Plastic parts are laboratory grade and will withstand contact with common organic solvents
10.Temperature setting range: Ambient temperature ~ 99 ℃
11.Temperature control accuracy: ±1℃

Hit Counter

Send mail to webmaster@gentaur.com with questions or comments about this web site.
Copyright © 2009 GENTAUR BVBA
Last modified: 05/13/09